Even more topics for Power Users

• Cool RPi Commands
• How to create a Raspberry Pi-driven Kiosk display
• How to turn on HDMI
• How to reduce power consumption
• Shake Array Deployment: Clock Synchronization Guidelines
  • Scope
  • 1. Purpose
  • 2. Use a single local NTP server
  • 3. Allow all units to stabilize after boot
  • 4. Verify NTP lock before acquisition start
  • 5. Start data acquisition in a coordinated manner
  • 6. Built-in timing behavior (informational)
  • 7. Network and deployment recommendations
  • 8. Advanced timing solution
  • 9. Summary
• Solar Power Recommendations
  • Introduction
  • General Recommendations
  • Tools for calculating your solar system’s dimensions
  • Example 1: The Thorsten setup
  • Example 2: The Jochen setup
• Heatsinks and Raspberry Shake
• How to install your Raspberry Shake underground
  • Example 1: shallow posthole installation
  • Examples 2+: amateur seismic vaults
• How to Configure Third Party Software (e.g., Earthworm)
  • Earthworm (for local SeedLink Acquisition)